Solar street lights detailed installation process
YAHUA LIGHTING professional manufacturer of Solar LED street light. we would like to introduce solar led street light detailed installation process.
1. Foundation pouring
In the position of the fixture set aside meet the standard pit (according to the height of the poles design depth); to the embedded parts positioning pouring. The embedded parts are placed in the middle of the square pit, one end of the PVC threading pipe is placed in the middle of the embedded part, and the other end is placed in the battery storage place. Pay attention to keep the embedded parts, the foundation and the original surface in the same level (or the top of the screw and the original surface in the same level, depending on the needs of the venue), one side and the road parallel; this can ensure that the poles stand upright Not skewed. And then to C20 concrete pouring fixed
2. Install solar panel bracket and lamp
3.The battery into the battery box, in accordance with the technical requirements of the cable connected to the controller; first take the battery, andthen connect the lamp fixture, and finally connect solar panel; wiring operation must pay attention to the wiring and the controller marked on the terminal Can not be wrong, positive and negative polarity can not crash, can not be reversed; otherwise the controller will be damaged.
4.The debugging system is working properly; release the controller on the solar panel cable, light; at the same time connected to the sun board cable, light off; and then carefully observe the controller on the changes in the lights.
If you need more solar light infomration and price , please E-mail to: email@example.com